• Lubricates, cleans and provides a long lasting protective coating that reduces friction and metal wear
• Protects against corrosion and will not attract dust, dirt or sand and works in all types of environments
• Will not burn off like a petroleum products and is safe to use on metal, wood, plastic parts
• Does not allow carbon, copper, lead and plastic to stick and will reduce cleanup time by 50%
• Non-Toxic and Non-hazardous. Developed with your health, safety and the environment in mind

• Lubricates, cleans and provides a long lasting protective coating that reduces friction and metal wear
• Protects against corrosion and will not attract dust, dirt or sand and works in all types of environments
• Will not burn off like a petroleum products and is safe to use on metal, wood, plastic parts
• Does not allow carbon, copper, lead and plastic to stick and will reduce cleanup time by 50%
• Non-Toxic and Non-hazardous. Developed with your health, safety and the environment in mind

• This lube stays wet 5 times longer then any other traditional lubricant. Reduces friction and wear
• Protects against corrosion and will not attract dust, dirt or sand and works in all types of environments
• Will not burn off like a petroleum products and is safe to use on metal, wood, plastic parts
• Does not allow carbon, copper, lead and plastic to stick and will reduce cleanup time by 50%
• Non-Toxic and Non-hazardous. Developed with your health, safety and the environment in mind

End retainers are black oxide. Connectors have phosphate finish.

Trigger and hammer pins with lubrication ports and E-Z installation tool. An absolute must-have for all M-16 owners. They will also protect your AR-15/AR-10. Special anti-creep retainers prevent all wear on your irreplaceable M-16 or AR-15 receiver. Anti-creep retainers removable for lubricant injection. Pin installation tool & allen wrench included. No modification to gun required.

• .154 sized pins will fit most standard lower receivers

• US Made
• Anti-Rotation Locking Cam Pins
• Replaces Trigger/Hammer Pins
• Allen Key Included

• US Made
• Anti-Rotation Locking Cam Pins
• Cerakote Finish
• Replaces Trigger/Hammer Pins
• Allen Key Included

End retainers are black oxide. Connectors have Cerakote finish.

Trigger and hammer pins with lubrication ports and E-Z installation tool. An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent all wear on your irreplaceable M-16 or AR-15 receiver. Anti-creep retainers removable for lubricant injection. Pin installation tool & allen wrench included. No modification to gun required.

• .154 sized pins will fit most standard lower receivers

• Black Bolt Catch
• Black Safety Selector
• Black Magazine Catch/Button
• Black Takedown/Pivot Pins
• All Springs, Pins, Detents, and Screws

Milspec FCG includes:

• Trigger in your choice of color
• Trigger Spring Group
• Hammer
• Disconnector

Kit includes standard Hammer, Trigger, 2 Hammer and Trigger Pins, Hammer and Trigger Springs, Disconnector and Disconnect spring. This kit will come with a Black Stainless Steel Hammer and Trigger.

Includes:

• Stainless trigger

• stainless speed hammer

• disconnector

• Trigger, hammer and disconnector spring

• .154 trigger pins

ENHANCED LOWER PARTS KIT - CONSISTING OF THE FOLLOWING

Enhanced Bolt Catch (BAD-EBC-IC), which is a cost friendly alternative, without sacrificing the quality for your AR build! The AR-15 Cast Enhanced Bolt Catch is 8620 heat treated cast steel with a manganese phosphate black finish. With this upgrade you have a versatile modular design, enhanced control surfaces, lightweight engineering, and better ergonomics.

• Lightweight but Robust Design 0.39oz
  
• Compatible with Norgon Ambi-Catch Without Interference
  
• Raised "T-Shaped" Heel Provides Positive and Distinctive Control Surface for Bolt Lock Back
  
• Bold Horizontal and Diagonal Serrations Provides Positive Purchase

Enhanced Single Sided Safety Selector (BAD-E4S-IC) for the AR15 Style Rifles.

• Based on our famous BAD-ASS Ambidextrous Safety Selector with distinctive and diagonal serrations.
• Single Side Safety Selector (0°-90° SEMI AUTO)
• Fit all Mil-Spec Dimensioned AR-15 Lower Receiver
• Black Phosphate Finish
• Investment Cast 8620 Heat Treated Steel
• MADE IN U.S.A.

Enhanced Magazine Catch - BAD-EMC-IC

• Process: Investment Cast (Same Process as Mil-Spec)
  
• Material: 8620 Heat Treated Steel Finish: Black Phosphate Finish
  
• Construction: One Piece Engineering (Not Two-Piece)
  
• Design: Lightweight Fluted Design
  
• Compatibility: Compatible with Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc(BAD-EMR BUTTON INCLUDED)
  
• Length: Shorter Threaded Pin to Reduce Installed Magazine Button Profile of Solid Face Magazine Release Buttons
  
• Weight: 0.25 oz (v.s. 0.32 oz Mil-Spec)

Includes:

• Take Down Pins
• Magazine Release
• Safety Selector
• Trigger Guard
• Bolt Catch
• All pins, screws and detents.

ENHANCED LOWER PARTS KIT - CONSISTING OF THE FOLLOWING IN YOUR CHOICE OF COLOR!

Enhanced Bolt Catch (BAD-EBC-IC), which is a cost friendly alternative, without sacrificing the quality for your AR build! The AR-15 Cast Enhanced Bolt Catch is 8620 heat treated cast steel with a manganese phosphate black finish. With this upgrade you have a versatile modular design, enhanced control surfaces, lightweight engineering, and better ergonomics.

• Lightweight but Robust Design 0.39oz
  
• Compatible with Norgon Ambi-Catch Without Interference
  
• Raised "T-Shaped" Heel Provides Positive and Distinctive Control Surface for Bolt Lock Back
  
• Bold Horizontal and Diagonal Serrations Provides Positive Purchase

Enhanced Single Sided Safety Selector (BAD-E4S-IC) for the AR15 Style Rifles.

• Based on our famous BAD-ASS Ambidextrous Safety Selector with distinctive and diagonal serrations.
• Single Side Safety Selector (0°-90° SEMI AUTO)
• Fit all Mil-Spec Dimensioned AR-15 Lower Receiver
• Black Phosphate Finish
• Investment Cast 8620 Heat Treated Steel
• MADE IN U.S.A.

Enhanced Magazine Catch - BAD-EMC-IC

• Process: Investment Cast (Same Process as Mil-Spec)
  
• Material: 8620 Heat Treated Steel Finish: Black Phosphate Finish
  
• Construction: One Piece Engineering (Not Two-Piece)
  
• Design: Lightweight Fluted Design
  
• Compatibility: Compatible with Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc(BAD-EMR BUTTON INCLUDED)
  
• Length: Shorter Threaded Pin to Reduce Installed Magazine Button Profile of Solid Face Magazine Release Buttons
  
• Weight: 0.25 oz (v.s. 0.32 oz Mil-Spec)

Includes:

• Enhanced aluminum trigger guard

• Extended take down/pivot pins

• ambidextrous safety

• Magazine release assembly

• bolt catch

• all springs, pins, and detents included.

• Battle Arms Development Enhanced Bolt Catch
• Extended Knurled Takedown/Pivot Pins
• AM-15 Safety Selector Assembly
• AM-15 Magazine Release Assembly
• All pins,springs,detents

Guntec USA AR15 / AR .308 EXTENDED MAG CATCH and PADDLE RELEASE

• Battle Arms Development Enhanced Bolt Catch
• Extended Knurled Takedown/Pivot Pins
• AM-15 Safety Selector Assembly
• AM-15 Trigger Guard
• AM-15 Magazine Release Assembly
• All pins,springs,detents

• Black A2 Grip
• Black Milspec Fire Control Group
• Cerakote Trigger Guard
• Cerakote Bolt Catch
• Cerakote Safety Selector
• Cerakote Magazine Catch/Button
• Cerakote Takedown/Pivot Pins
• All Springs, Pins, Detents, and Screws

• Battle Arms Development Enhanced Bolt Catch
• Extended Knurled Takedown/Pivot Pins
• AM-15 Safety Selector Assembly
• AXC enhanced Aluminum Trigger Guard
• AM-15 Magazine Release Assembly
• All pins,springs,detents

• Black A2 Grip
• Cerakote Milspec Fire Control Group
• Cerakote Trigger Guard
• Cerakote Bolt Catch
• Cerakote Safety Selector
• Cerakote Magazine Catch/Button
• Cerakote Takedown/Pivot Pins
• All Springs, Pins, Detents, and Screws

• ATI Shock Absorbing Enhanced Dupont Ergo Grip
• Polymer Enhanced Trigger Guard
• Takedown/Pivot Pins
• Safety Selector
• Magazine Catch
• FCG
• All Springs, Pins, Detents, Wrenches and Screws

Includes:

• Zombie Green Overmolded Grip

• Zombie Green Enhanced aluminum trigger guard

• Zombie Green Extended take down/pivot pins

• Zombie Green ambidextrous safety

• Zombie Green Magazine release assembly

• Zombie Green bolt catch

• all springs, pins, and detents included.

• Strike Industries XBC Bolt Catch
• Strike Industries Magazine Release/Button Assembly
• Strike Industries Enhanced Takedown/Pivot pins
• Guntec USA Enhanced Skeletonized trigger guard
• Anderson Manufacturing Ambidextrous safety selector