Anderson Oops Kit
Included: Bolt Catch Detent, Pin, and Spring; Buffer Detent and Spring; Magazine Catch Spring, Safety Selector Detent and Spring; Take Down Pivot Pin Detents and Springs; Mil Spec Hammer Spring, Trigger and Disconnect Springs, Trigger Pins; and Trigger Guard Roll Pin.
Milspec Black AR-15 Charging Handle
- Mil-spec part
- Great for new builds or replacing worn parts
- Dependable parts at an incredible price
- Anodized
List Price: $19.99
Our Price: $11.99
Sale Price: $9.99
Savings: $10.00
Standard Black Steel Low Profile .750 Gas Block
Steel .750" Diameter Low Profile Gas Block
These gas blocks are made from steel with a black matte finish. Very low profile to clear most rail systems.
*Includes wrench and roll pin( Gas blocks will be either Trinity Force or AXC Tactical)
Punisher Ejection Port Dust Cover AR-15 - AXC
Made in USA
Military specification and dimensions
Standard Ejection Port Cover
Ejection Port Pin (Phosphate Finish)
Ejection Port Spring
Ejection Port Retaining Clip (Phosphate Finish)
Proper fit and function
Laser Engraved: Punisher
Cal: .223 / 5.56
USA/FLAG Ejection Port Dust Cover AR-15 - AXC
Made in USA
Military specification and dimensions
Standard Ejection Port Cover
Ejection Port Pin (Phosphate Finish)
Ejection Port Spring
Ejection Port Retaining Clip (Phosphate Finish)
Proper fit and function
Laser Engraved: USA/Flag
Cal: .223 / 5.56
AR15 EJECTION PORT DUST COVER ASSEMBLY
Made in USA
Military specification and dimensions
Standard Ejection Port Cover
Ejection Port Rod
Ejection Port Spring
Ejection Port Retaining C-Clip
Cal: .223/5.56
Black Anti-Rotation Pins
Anti-Rotational Pins - Black .154
End retainers are black oxide. Connectors have phosphate finish.
Trigger and hammer pins with lubrication ports and E-Z installation tool. An absolute must-have for all M-16 owners. They will also protect your AR-15/AR-10. Special anti-creep retainers prevent all wear on your irreplaceable M-16 or AR-15 receiver. Anti-creep retainers removable for lubricant injection. Pin installation tool & allen wrench included. No modification to gun required.
Size- .154 sized pins will fit most standard lower receivers
Magpul PMAG 30 AR/M4 GEN M3 5.56 NATO Magazine - Black
Magpul continues to grow and develop based on innovation, simplicity, and efficiency. At Magpul, mission driven requirements inform their product design, materials, and manufacturing, focusing on efficiency without sacrificing quality or performance.
The PMAG 30 GEN M3 is a 30-round 5.56 NATO polymer magazine for AR-15/M4 compatible weapons. This magazine features a long-life USGI-SPEC stainless steel spring, four-way anti-tilt follower and constant curve internal geometry for reliable feeding. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.
NOTE: GEN M3 PMAGs may not be compatible with all billet lowers without slight modification of the magazine overtravel stop.
Slim, for better compatibility with tight magazine pouches, this easy to disassemble magazine features a flared floor plate, low profile ribs, and aggressively textured front and rear surfaces for positive control. A paint pen dot matrix on the bottom panel of the body allows easy marking for identification.
Features:
- Impact and crush resistant polymer construction
- Constant curve internal geometry
- Anti-tilt, self-lubricating follower
- Long life USGI-SPEC stainless steel spring
- Over-travel insertion stop
- Ribbed gripping surface
- Aggressive front and rear texture
- Paint pen dot matrix panels
- Flared floorplate
- Pop-off impact/dust cover
