|
|
|
|
|
|
|
|
|
|
|
Inspired by the ODIN Works O2 Lite, the XMR3 is the latest mag release available from ODIN Works. Machined from billet 6061 aluminum and designed to work with KNS pins and the BAD lever. The XMR3 has the largest profile yet, making it easily accessible by all shapes and sizes of hands and fingers. Works with both AR15 and AR10 lower receivers. Easy install that takes minutes.
Technical Specs
- Compatible with BAD Lever.
- Compatible with KNS Pins.
- .1 oz (including paddle, button, and screws)
- Large surface area for quick magazine reloads.
- Easy to reach.
- Ergonomic design.
- Release magazine without changing grip or position.
- Contoured for positive depression and reduced slip.
|
Inspired by the ODIN Works O2 Lite, the XMR3 is the latest mag release available from ODIN Works. Machined from billet 6061 aluminum and designed to work with KNS pins and the BAD lever. The XMR3 has the largest profile yet, making it easily accessible by all shapes and sizes of hands and fingers. Works with both AR15 and AR10 lower receivers. Easy install that takes minutes.
Technical Specs
- Compatible with BAD Lever.
- Compatible with KNS Pins.
- .1 oz (including paddle, button, and screws)
- Large surface area for quick magazine reloads.
- Easy to reach.
- Ergonomic design.
- Release magazine without changing grip or position.
- Contoured for positive depression and reduced slip.
Cerakote Colors
|
- Replace or upgrade your current AR15 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.
Technical Specs
- Made from 7075 Billet Aluminum
- Ergonomic design for easy gripping
- Choose from 4 Odin Factory Colored XCH Latches.
- For AR15
|
|
|
|
|
|
|
|
|
|
|
- Replace or upgrade your current AR15 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.
Technical Specs
- Made from 7075 Billet Aluminum
- Ergonomic design for easy gripping
- Choose from 60+ Colored XCH Latch.
- For AR15
CERAKOTE EXAMPLES GUN CANDY EXAMPLES
|
- Different than any forend ODIN Works has ever made, the Ragna is a complete change from past forends. Literally designed for the fastest install possible, the RAGNA features a one piece barrel nut with no shims or clocking needed. The RAGNA will make any build better. Strong, lightweight, and unique, the RAGNA is available with KEYMOD attachment points where you need them.
Technical Specs
- Free floating
Type 2 Hard Anodize/H-Series Cerakote Once piece barrel nut, black nitride coating All mounting hardware included Accessory rail not included Made from 6061 T6 aluminum Inside Diameter: 1.35" Outside Diameter: 2.02" Tall by 1.52" KEYMOD available at 3, 6, and 9 o'clock Weighs just 9.27oz installed (including barrel nut) CERAKOTE EXAMPLES GUN CANDY EXAMPLES
|
|